Blue Snowball mic arm hilt w pop filter

This is a simple gadget to attach a Blue Snowball (or other) microphone to a standard "lamp arm" and it also includes a pop filter.

The bird is not included :-)

Arm_long.stl and ring_center.stl have to be glued together.
I've included the part arm_long in iges format to make it easy to adjust it (with other software than TinkeCad). (file: arm_long v8.iges)

I've printed the parts 0.2mm resolution. But the treads (on parts; center_plate.stl and locknut.stl) will be better if you use 0.15 instead.

I've printed these parts with support:
ball_joint.stl
ball_joint_attach.stl (Turn this one 90 degrees with the ball on the top)
arm_long.stl

Flip the locknut.stl 180 degrees, so you don't need support.

When printed we have used a sock, and pinched it in between ring_outer.stl and ring_center.stl to make the pop filter. it works great.

You might want to print several ball_joint.stl to give you more freedom on where to hold the pop filter.

The pictures are taken without the locknut...

Enjoy!