9mm Bearing Sleeves

These sleeves are designed to go on a 9mm Bearing as used on the X-axis of the Ormerod. Their purpose is to be pushed on to the bearing. You then trim the excess so the bearing and sleeve are the same size. Then use the Sleeved Bearing to replace the 10mm Bearing fitted to the Y-axis. This 10mm Bearing can then be fitted to the X-axis. The sleeves are in a group of 3, so hopefully you should be able to print as least one reasonable one out of the three.

This is to help people that don't have Lathes at their immediate disposal.