CR10 Enclosure home made

In goal to print ABS, i'm building my proper box for my CR10S
you will need some lath :
8 x 18x18x764
4 x 18x18x600

Some wood board :
1 x 800x600x5
2 x 800x600x3
4 x 800x400x3

some wood screws to fix the printed parts to the lath
for the axis of the hinge, or you print some cylinder of diameter 3mm, or you use some 3mm screw

2 cut have to be done in the left windows to give clearance to the hinge of the right windows
This right windows can slide on the lath to give more clearance on the inside box if not fixed on the lath (vertical lath have to be fixed )

printing of all parts is printing. Have to build a lock for the windows

right now, cost of all component is arround 25€ without the print

05/01/2019 - Modification on part N°6 and 12. Pb with a wall...sorry. Step file not uptaded, so take care
12/01/2019 - Modification on part N°11; N°12. new part 11-1; 11-2 and 12-2 to lock the 3 door