Summary

This is a thing for you stacking freaks like me. It's a clip for boxes so there is no need for tape anymore, it won't get in a way for other boxes (same size or smaller), you only need 1 per box and it has a stopper in locked position. I recommend reinforcing that side with some duct tape and manually poke holes in it. I would also recommend to cut out the 2 smaller sides of the box, as the clip tends to get in a way due to the design. Feel free to upgrade it!

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>70%</p></div></p>                                                    <strong>Filament:</strong> K-Camel PLA                yellow                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed it using 0.3 mm layer height and 0.4 mm line width and had 4 bottom layers and 2 top ones. The towers are having some problems with the spacing but it seems to add to the strength of grip. I also tried it with 1 and 2 walls but no significant difference except the print quality of the reinforcement slope.</p></div>

Box Clip