Tinyleader Mount for Tattuu 300mah 3s

Need this or any other part but you don't have a printer. No problem visit my site and I will print you one or any other files you need to be printed.
Visit: Http://pandemicfpv.com

Visit my Youtube channel for giveaways and reviews.
https://www.youtube.com/c/TheQuadcopterReview

This mount should be printed with TPU.

This mount will allow you to use a true 3s Lipo on a Fullspeed TinyLeader. I created this to use my Tattuu 300mah 3s batteries.

Tips are always welcome! As a designer, it often takes several prints that go in the trash to refine the end product. Custom design requests also reviewed. If I can do it for you I will.

Material: TPU
Brand: Sain Smart
Temp: 115c
Bed Temp: 60c
speed: 30
Retractions: Off
Layer height: .08 to .1 for me you are safe in this range. You only sacrifice a small bit of quality.
bottom/top thickness: 0.8
Fill Density: From 80 to 100 for a rigid finish 50 to 80 for a softer mount. I used 80 and 90
Support type: Touching Build plate only.