e6000 to Luer Lock Syringe Adaptor

Never lose a drop of e6000 again!

This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily.

To use:

1. Screw the luer lock end on a syringe
2. Jam the nozzle of e6000 in the other end
3. Squeeze the e6000 tube while pulling the syringe
4. Once you've loaded enough, remove the e6000 and recap
5. Pull any remaining glue through then remove the adaptor and discard it
6. Stand the glue syringe on end to let it seep to the bottom, then purge the air out
7. Attach your preferred gauge blunt syringe tip
8. Glue on