Summary

Mount and case for the HK FPV250 frame with a house for the 1/3-inch SONY CCD Camera cut down to 32x32mm

Instructions

One of my 1/3-inch SONY CCD cameras broke after a minor crash so I made this mount and cover to protect it better and be able to tilt the camera down for less sun into the lens. I use zip-ties to mount the camera to the case and the mount to the frame plus a M3 bolt for attaching the camera back cover to the mount. There is a zip-tie head inside the case on each zip-tie that the camera is leaning against (See image 1). The house v2 is not as deep as v1 and with built in support to keep the camera straight however not tested to see how well it works.

FPV250 Camera Mount & Case