Green_Lantern_Whiteboard_Magnet

This Item was printed in:REAL-Filament's Black PLA ø2.85 and Nuclear Green PLA ø2.85

I had a old office magnet laying aroud and decided I wanted it to be a green lantern magnet, so I went in Fusion360 designed myself a magnet, and printed it, and now I wanted to share it....so here ya go.

Slicer: Ultimaker Cura 3.6

Print Settings

Quality
Layer height: 0.20mm

Shell
Wall Thickness: 2mm
Top/Bottom Thickness: 2mm

Infill
Infill Density: 20%
Infill Pattern: Grid.
Infill Overlap Percentage: 20%
Skin Overlap Percentage: 20%

Speed
Print Speed: 70 mm/s.
Travel Speed: 120 mm/s.

Support
Enable Support: No.

Build plate Adhesion
Build plate adhesion type: None.