Raspberry Case for PI 3 - PI 2 - PI 1

03/30/2019 - FIRST RELASE OF CASE

Is possible to choose between two versions of top case. Full or open to use the GPIO.
To use 3 mm screws you need to enlarge the raspberry holes with a bit

COMPATIBLE WITH:

Raspberry 1
Raspberry 2
Raspberry 3

PRINTER SETTING

Extrusion Width:0,40 mm
Layer Height: 0,20 mm
Top/Button Layers: 4
Outline perimeter: 2
Infill: 20 %
Support: Only for nuts hole (See Image)

EXTRE

Nr. 4 Nuts 3 mm
Nr. 4 Rounded Head Screws Ø3mm x L16mm