Summary

Simple hack to attach a roll of IKEA Mala paper to a Latt table.

Prints in around 2 hours at 0.2mm resolution.

Attaches to the inside of the table frame using 2 countersunk M3x20mm screws per mount and needs a 1cm dowel cut to length.

I used Cura to create a mirror image to make the other mount.

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>All-metal Mega</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>                                                    <strong>Filament:</strong> Anycubic PLA                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed the mounts with the screw plate point upwards. No supports needed for the screw holes.</p></div>

Post-Printing

I mounted the hangers on the inside of the top frame of the Latt table, along the long side. I mounted them at the far end so that the roll of paper can be moved along the table as needed.
1 cm dowel inserted through the centre of the paper roll and then just slotted into the hangers.

How I Designed This

In FreeCAD, files included.

Mala / Latt Ikea hack - kids drawing paper table