Summary

A quick bracket to mount a downpipe to a wall. I did this because it was easier and faster than going to the store to find another one after mine broke.

Need a bracket for a gutter or drain pipe. This one will print in about 40 minutes.

I made a version which slides over the pipe and slides down and one which clips over the pipe in-situ.

No Support required
Printed in PLA
20% infill
1.2mm wall thickness.

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>All-metal Mega</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>2.0</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> BQ PLA                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I had to size mine up by 2% in the slicer. I think my printer prints slightly small.</p></div>

Downpipe Gutter Drain Wall Bracket