Revision III Tricopter reinforced for 13mm aluminium

Some adjustments to fit 13mm, aluminium reinforcement for stronger engines and make a diferent servo fit in the tail.

I put only the modified parts, the rest can be found at:

• http://www.thingiverse.com/thing:275915 - Revision III Tricopter
• http://www.thingiverse.com/thing:198114 - Omnimac MultiWii Pro Mount v1.0
• http://www.thingiverse.com/thing:216100 - Case for MultiWii Pro from HobbyKing

My setup:

Turnigy L2215J-900 Brushless Motor (200w):
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=14737

TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo 3kg / .06sec / 21g:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=22687

Hobby King 30A ESC 3A UBEC (flashed with simonk firmware)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=15205

MultiWii PRO Flight Controller w/MTK GPS Module (with MegapirateNG):
http://www.hobbyking.com/hobbyking/store/__26588__MultiWii_PRO_Flight_Controller_w_MTK_GPS_Module.html?strSearch=multiwii

Turnigy nano-tech 3300mah 2S 65~130C Lipo Pack:
http://www.hobbyking.com/hobbyking/store/__19132__Turnigy_nano_tech_3300mah_2S_65_130C_Lipo_Pack.html

10x4.7 propellers

I used aluminium arms from: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=22800
2 front arms with 250mm and back arm with 247 mm

Videos soon...