NYM84 Mechanical Keyboard Plate

It's still a bit of a WIP, but hey, it's free :)

Printing
I went with .3mm layer height and 40% infill using Solutech PLA. This produced a nice, hefty result fairly quickly.

Post production
If you end up having to print one half at a time like I did, you will need to remove material from the split area in order to join the halves. Just do it in small increments and keep checking the fit...it goes fairly quickly.

Stabilizers
The plate is only compatible with PCB-mount stabs.

Mounting screws
You will need longer M2 screws for this to work. I used the 8mm screws from an iExcell set.

Silencing
There's room for sports tape or something similar between the plate and PCB.

In case it helps, here's my build log on Imgur

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4yxOwbqauvd