Summary

PIT's Torque Nose & FPV Camera Protector Pair.
Provides some extra protection for the fpv camera and the nose of the quad.
Print with a support and use pliers and a precision knife to remove the support later. Depending on the quality of the print the supports may be difficult to remove when TPU is used.
Cura 4 settings below.

More information about the frame and a build here: https://rotorbuilds.com/build/18053

Print Settings

Supports:

Yes

                                            <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.16</p></div></p>                                                    <strong>Filament:</strong> any TPU                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>adhesion_type = skirt<br>layer_height = 0.1618<br>layer_height_0 = 0.3<br>material_bed_temperature = 0<br>retraction_combing = all<br>support_enable = True<br>support_type = everywhere<br>bottom_layers = 4<br>cool_fan_speed = 100<br>retraction_amount = 2<br>retraction_enable = True<br>retraction_prime_speed = 25<br>retraction_retract_speed = 25<br>slicing_tolerance = middle<br>speed_layer_0 = 20<br>speed_print = 30<br>speed_topbottom = 25<br>speed_travel = 260<br>support_pattern = grid<br>support_z_distance = 0.3<br>top_layers = 4<br>wall_line_count = 3<br>z_seam_type = shortest</p></div>