Rocket Launcher P-51

This rocket launcher was designed to replace the original drop tanks for the Eleven Hobby 1100MM P-51 Mustang.
You can use them in any r/c plane you want just removing the rails and gluing under the wing.
Size: 10x10x2 cm aprox.
Printed in Creality CR-10 with this basic Printer settings (Simplify3d):
Nozzle 0.40mm
Layer height 0.3000 mm Top= 3 Bottom= 3 Outline/Perimeter= 2
Retraction= yes Coast at end= yes Support= yes
Infill 50%
Speed= 3600.0 mm/min
Printed vertically, rocket nose cone up.
You can improve quality by decreasing speed and layer height.
Before printing check support has been generated for all horizontal beams.