Summary

A printed isolator block which holds 2 M4 bus bolts for power distribution.

Instructions

You will need...

2 Hexagon Head M4 x 20mm bolts.
2 M4 half nuts
2 M4 lock nuts

Slot the M4 bolts into the isolator block, then cover the heads with small squares of insulating tape to insulate from the carbon plate. Then attach to the frame with double sided tape. Fasten down from the top with a M4 half nut then connect your crimped connectors before finally locking down tightly with a M4 lock nut.

Note I also solder the connectors after crimping.

Sky-Hero Spy Power Distribution Isolator