Linear slider model.A
Zero Limit sensor use HALL-IC and Rabber_Magnet.
The span is determined by the length of the shaft and the belt.
Assy Main -01:
..belt x1 from Ali-exp
..Assy Base-L -01 x1
....Base-Top -01 x1 0.15mm 50% no-support
....Base-L -02 x1 0.15mm 50% no-support
....M4 cap 25mm x4
....M4 nut x4
..Assy Base-R -01 x1
....Base-Top -01 x1 0.15mm 50% no-support
....Base-R -02 x1 0.15mm 50% no-support
....M4 cap 25mm x4
....M4 nut x4
..Assy Carry -03 x1
....Carry -03 x1 0.15mm 50% no-support
....LineraSlider Hold-A x1 0.15mm 100% no-support
....LineraSlider Hold-B x1 0.15mm 100% no-support
....BeltPully Ring x2 0.1mm 100%
....TS3692N65 x1 TAMAGAWASEIKI
....pulley.gear x1 from Ali-exp with φ5φ4brass sleeve
....SM5G-W x2 NB
....Assy Belt pully x2
......Belt Pully Ring x2 0.1mm 100% no-support
......Bearing 4-9-4 x2 from Ali-exp
......M4 cap 25mm x1
....M4 nut x4
....M3 cap 100mm x4
....M3 nut x4
....Rabber.Magnet x1
..Assy Hall-IC x1
....PCB x1 Cutting universal board
....HALL-IC x1 SK
..φ6 320mm SUS all screw shaft x3
..φ5 310mm SUS round shaft x2
..M6 Nut x12
And plus, Wire 4P and 3P for Motor and Hall-IC,
some washer for M4 and M6.