Summary

This model captures the beauty of Arabic calligraphy, and by switching filament a striking effect can be achieved. Although any colors may be used, a green/white print is recommended.

Instructions

This is much like the other disks I have done, the primary difference being the "writing" is half the height of its predecessors.

Using 0.3mm layer height, the first eight layers will be the disk -- I suggest white. Then switch to another color -- green is a good choice here -- and print the remaining two layers.

Although most of the strokes should be wide enough to print, some of the details may induce failed extrusion (at least with my replicator 2) so that is something to watch for. Extrusion never failed, but my replicator 2 was unable to produce it accurately.

Bismallah Coin