case&stand for SIPEED Maixduino

SIPEED Maixduino
https://maixduino.sipeed.com/

-This Thing is a simple boxy case and stand for Maixduino.
-In order to assemble the stand, 4 pairs of M2.6(10 or 12mm) bolts and nuts are required.
-Perhaps, due to the revision and improvement of Maixduino, this thing may not be suitable for it.

CAD file : case045_.stp (.123dx)

-Regarding ; case045-spk.stl
case045-spk.stl is a tray for attaching a small thin speaker.
A small speaker about 4 to 5 mm thick is suitable.
However, I have not tried it because I do not have the right item for it.
-Regarding; case045-stpv.stl
A cylindrical mobile battery with a diameter of about 22 mm can be used instead of case045-stpv.stl.

-Additional note(7/9/2019)
?How to make the camera module position more stable?
...Prepare a piece such as an eraser shaped to roughly 3x3x15mm.
...And it would be nice to paste it as shown in the picture.

Update; 8/4-2019
case058.stp (.123dx) has been added.
Its contents are "case058-top2.stl".
-"case045-cam.stl" and "case045-top.stl" are integrated to "case058-top2.stl".
-SD card and rese/boot button can be operated easily.
Please refer to the added photos.