Summary

Small, Printable Quadro Copter

Instructions

Partlist:

8 x KA 25 x 16 WN Screws to attach the Arm
4 - 8 x KA 22 x 6 WN Screws to attach the Feet to the arms
4 x Motors, i used Turnigy Aerodrive SK3 2822-1275 Brushless Outrunner with Short Shaft
4 x ESC, i used Hobbyking SS Series 18-20A ESC, flashed with SimonK firmware, but it's probably easier to buy Afro ESC's with the Firmware already installed.
4 x Props, i used 7x3.8 Turnigy Slow Fly Electric, 2 colors, each one counter rotating.
1 x Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board
1 x R/C Receiver
a bit of felt to put between the arm and the cross of the motors
And of Course a Battery, some Cables, Soldering tools