Summary

At the office, they want everything in the fridge labeled with your name and a date. I remixed this seashell to hold a popular-brand permanent marker and a popular brand 1.5" x 2" adhesive label pad, so that the tags are always handy.

To use the scad file, grab the original stl file from https://www.thingiverse.com/thing:2737054 and drop it in the same folder as my .scad file, then open the .scad file in openscad.

Print Settings

Printer:

Qidi Tech I (2018)

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong> Any PETG                As Desired                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed mine in natural PETG, but any desired material should work.</p><p>The interior overhangs are aggressive, but they're not normally visible so they don't have to be perfect.</p></div>

Post-Printing

Installing the magnet

            <div><p>This is designed for a 10mm x 2mm round rare earth magnet.  After printing, put a modest amount of CA glue or other adhesive in the cavity, and then insert the magnet until it's flush.  Allow glue to cure completely before putting it on your fridge.</p></div>

Pen & Sticky Note Magnet Shell