Arduino Wii2USB Adapter Case

This thing is a case/chassis for an Arduino-based Wii2USB adapter. For this build, I used an Arduino Micro 3.3V from SparkFun (https://www.sparkfun.com/products/12587) and a Nunchucky Wii adapter board I purchased from Adafruit (https://www.adafruit.com/product/345).

There are lots of arduino sketches on the Internet for the software side of this.

The chassis is designed for four wires to connect from the Arduino over to the Nunchuky and after snapping together it will hold all of the pieces in place.

There are four alignment notches. They are NOT structural. They are only for alignment. To keep the chassis halves together I welded the halves together with a soldering iron (https://www.instructables.com/id/Welding-Plastic-W-Soldering-Iron/)