Lazy Susan

I needed something to help me wire devices at work. I came up with the idea of a lazy susan to help me out. This is a three part assembly. This assembly requires the following hardware: (34) 3/8" ball bearings, (4) M3 thermal inserts, and (4) M3 x 10 screws. All original designs were made in FreeCAD and the stl files were made with a maximum edge length of 80 thou. The spool holder portion can be redesigned for other holders or tools. The (4) M3 are each 1 inch from the center of the lazy susan, and I recommend for convenience following this M3 layout.

Aside: there is some play in the ball bearing layout, if anyone has recommendations on how to tighten that up, please message me.