CCP Dash Button - Cloud and on-prem versions

The CCPDashButton is a case for an ESP32 with an OLED display programmed to act as a dash button.
When the key is pressed a production grade kubernetes cluster is provisioned in my lab through the Cisco Container Platform.
Check out the project on GitHub: https://github.com/fdiniro/CCPDashButton

The case comes in two flavors: house shape and cloud shape.
The two shapes are intended to be used to have the Cisco Container Platform to deploy a kubernetes cluster on-prem (house shape) and in AWS (cloud shape).
In both case the button is a different object so if you have a dual extrusion printer, you can print the button in a different color, perhaps using the same of the case like I did.

If you have a printer that makes a "fat" initial layer you should set to -0.2 / -0.4 the "Initial layer horizontal expansion" setting to compensate for it, otherwise with the low tolerances in the button you may end up with the button welded with the cover.

I printed at 0.2 layer on an Ultimaker 3, in PLA at 210° and everything was nearly fine.
You may want also to play with the flow if you have "beefy" layers, in my case a 96% flow worked better.