Summary

Bought this GPS speedo for my Blokart but it doesn't have a useful way of mounting it on the handle bar shaft so I designed this.

Instructions

This needs to be printed out the way it comes to ensure the layers have the correct orientation to prevent splitting.
Print it out then slide it onto the handle bar shaft from the bottom, it will spread slightly as it passes the bend near the top and this is why it has the split down the side.
Use two M3 machine screws approximately 15mm long and 2 x M3 nuts.
Secure the GPS with a couple of 3mm x100mm cable ties as per the photos.

Blokart GPS or anything else holder