Summary

My very first thing!
I made it to hold a 3W Led star and to attach a 13x13mm heatsink to the back. The holes are a little tight, but that shouldn't be a problem.

Instructions

The holes on the sides of the star are supposed to be 3mm. It took a while before Slic3r was able to put a full circle inside given my 0.3mm nozzle.
The space between the legs is there to place a small heatsink at the back. I'll be using a relativly high 13x13mm version sticking it with just a drop of cooling paste.
Printed using standard K8200 settings, no infill, 0.3mm nozzle, 0.25mm layer height. As i'm using a mirror, I raised the heatbed temp to 60 degrees.

Led Star Bracket