Magnetic screw tray - easy print

This is a very esay to print Magnetic Screw Tray. It does no require support, just print it oriented like in the pictures.

Everything is friction fit, both the dividers and magnets.

You can use it without or with the dividers provided based on the work you are doing.

To work you will need 6 magnets 10mm diameter .
( Here is a link to the one i used from aliexpress: https://it.aliexpress.com/item/32973996317.html?spm=a2g0s.9042311.0.0.756e4c4dCmnWkY)

Hope you like it, have a good one!