Summary

Alejandro is a friend from RCT. It is 308 mm long x 64 mm high x 20 mm deep. The name is made using SketchUp but it is too long for my Prusa i3 MK3 bed. So I used Microsoft's 3D Builder to subtract a small notch between the 'a' and the 'n' from the back. Then I used Prusa Slicer's Cut feature to separate the model in two pieces. After they were printed, I glued the notch in place with gel cyanoacrylate.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong> AMZ3D PLA                green                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>It is all the same material but the photos come out differently due to the lighting and automatic settings.rnrnI have included the whole 'Alejandro' and the two pieces 'Aleja' and 'ndro' as stl files.</p></div>