Zooz 4-in-1 Sensor mounting bracket

Our Zooz 4-in-1 Sensor was mounted on the wall at an angle using double-sided tape. When I removed it for painting I didn't have any more double-sided tape laying around but I did have a bunch of suitable screws on hand.

Problem is, I could not use them because that requires the sensor mounted perpendicular and this wasn't effective. There are no keyhole slots on the angled side so it was either wait until I could go buy some double-sided tape or design this bracket. Naturally, I choose the design-and-print option.

The bracket as printed on my Prusa MK3S fits loosely into the sensor and this is by design. If you want to modify for a more snug fit, feel free to edit the model online at https://www.tinkercad.com/things/lnye83dKc0H