Summary

I liked the 143_Snorlax model, but I wanted to make it a bowl. While I was at it, I added eyes and a mouth. There are fangs, but they're extremely subtle at normal size. I monkeyed with them for a while, but I found that if I forced them to be more obvious, they looked too big.

100% size for this is 110 mm by 105 mm by 39 mm. I'm printing it at 180% size as I type this, and it looks like it'll be great. That size makes the fangs more noticeable as well.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25% Cubic</p></div></p>                                                    <strong>Filament:</strong> SunTop PLA                Silk Green                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I definitely could have printed this successfully with a lower infill. I wouldn't go as low as 10%, but 20% should be absolutely fine.</p></div>

Snorlax Bowl