seat/saddle bike- topology optimization

EN
hey guys, I created this saddle for my three-year degree in mechanical engineering in order to reduce weight (March 2019, Unipa) . The work has focused ONLY on the saddle frame and the connection system with the seat tube with a mass reduction of 61% (not considering the saddle hull). More weight could be removed by redesigning the hull. The saddle is fixed and the adjustment in advancement and tilt occurs on the cad. The uploaded file refers to an average condition with the saddle tube inclination angle adjustment of 72 °.

The material used is PETG and the slicer is PrusaSlicer. I printed the piece inclined to have higher strength and I created the support with meshmixer. In the zip file there is the saddle with its support. I printed all with infill 100% except the hull. I use it for some months now and I have crossed a few hundred kilometers. For long runs suggest you put a cushion.

 Happy cycling at all

IT
ehi ragazzi, Ho creato questo sellino per la mia tesi triennale in ingegneria meccanica (Marzo 2019, Unipa) al fine di ridurne il peso. Il lavoro si è concentrato SOLO sul telaietto sella e sul sistema di collegamento con il tubo reggisella con una riduzione della massa del 61 % (non considerando lo scafo). Altro peso potrebbe essere tolto riprogettando lo scafo. La sella è fissa e la regolazione in avanzamento e inclinazione avviene sul cad. Il file caricato si riferisce a una condizione media di regolazione con angolo di inclinazione del tubo della sella di 72°.

Il materiale usato è il PETG e lo slicer è PrusaSlicer. Ho stampato il pezzo inclinato per avere maggiore resistenza e ho creato i supporti con meshmixer. Nel file zip c'è la sella con i vari supporti. Ho stampato tutto con riempimento al 100% tranne lo scafo. La uso da qualche mese e ho percorso qualche centinaio di chilometri. Per lunghe percorrenze consiglio di mettere un cuscinetto.

Buona pedalata a tutti