Malemule/Oriole 11 Degree TAC Nosecone

11 Degree Total Angle Cone nosecone sized for Estes Pro Series II 3" body tube.

Used on Improved Malemute and Oriole sounding rockets.

I printed the cone as a single wall spiralized out contour and the tip and base as 4 wall, 40% infill. I cut off the top of the cone and glued on the tip. Then I filled it with two part expanding foam, sculpted the base and glued on the bottom.

The base has a well sized for 29mm motor mount tubing. This is a handy size for a electronics bay for a flight computer or tracker.