Bowden extruder BCN3D+

Bowden adapter exclusive for the BCN3D+ printer with the BCNozzle 0,4 and 3mm diameter filament.
Complete BOM:

• 1x PLA ST (0.2 layer) printed Bowden support.
• 2x ABS HQ (0.1 layer) printed Bowden coupling. Note that there's a 1/8" threat inside.
• 2x Pneufit straight adaptor,1/8inx6mm @ http://reprapworld.com/.
• 0,7 meter of PTFE tubing, 3.18inner/6outer diameter @ http://reprapworld.com/.
• Required fasteners (6x DIN912 M3x12, 4x DIN912 M5x16, 6x DIN934 M3 nuts, 4x DIN125 M5).
  UPDATE 1: after several tests, the best results were achieved with Cura. You will find the config files attached, for both PLA and ABS.
  See instructions for more info.
  UPDATE 2: New carriage design thanks to the great work of DaniSaez Remixed by me (http://www.thingiverse.com/thing:428226)
  UPDATE 3: As ronald_kubo pointed at comments, this version is valid only for everybody who has a BCN3D+ starting with serial number 00.xxx (bought before November 2014). For those who has a BCN3D+ starting with serial number 01.xxx (bought after November 2014) use this remix.