• 3D Mesh Market
  • Print
  • Discover
    •  Login Signup

    Dice Tower with Fold-Up Trays, Aligned + Optimized Big Version

    Find out what else is available and how we can help each other at zahyest.com.

    Differences in Poikilos' Remix

    (vs 3DCentralVA's version)

    • The pivot point is now the same on both sides so that both trays work properly (with changes to arms described below to fit better).
    • The catch (that retains the trays when folded) is now the same on both sides so that both work properly.
    • The arms of the trays...
      • ...have a square end, and the shaft width is even, which I think fits the aesthetic better.
      • ...now have built-in supports.
      • ...no longer hit the tower before opening all the way (due to hole changes above, and a different bottom to the arms).
      • ...are now flat so they look better. There was no point in being wider except to house the old flexible pins which are not present in this version.
      • ...have cleaner mesh characteristics and no longer have "zero faces" (tiny polygons which are boolean artifacts in this case).
    • The pegs are stepped, so they fit tightly in the tray's holes and loosely in the tower for easy movement.
      • There is also a version of the tray included that has built-in pegs.
    • Various parts are now have a more even appearance (equal wall widths, etc.).
    • The battlements are several times thicker so they don't break off easily.
      • I also made battlements available as a separate model in case you already printed the old one (Break off your old battlements and glue the new one on or weld it with a 3D pen).
    • 150% version (optimized with thinner walls for faster printing at this or similar scales)
      • ~196 mm tall!
      • print at 83.3333% (83 + 1/3 %; 163.3242 [163.3241 and 2/3] tall) for a ~1.25 scale version (~163 mm tall)
      • has thinner walls (1.44, so that the 1.25x version has 1.2mm walls for printing in 1 stride with 1.2mm wall thickness in the slicer).
      • top corners are conformed to a 22.5 and 19.62 (22.5-(1.44*2)) bevel with 8 sides (32 sided cylinders: "guide bevel outer.Cylinder" and "guide bevel inner.Cylinder").
      • See "Stats" below for print settings and times.
    • See also: Changelog.

    Stats

    Version 1.2

    "Dice Tower 1.2.1.stl" + (2) "trays with built-in pegs +supports 1.1 for Dice Tower - Poikilos remix.stl"

    Cura - Extra Fast, no brim

    • 11h42m
    • 129g = 43.33m = $2.20 with Overture PLA+

    Cura - Extra Fast, no brim, Quality: Wall Line Width = 1.2

    • 7h 41m
    • 134g = 44.93m = $2.28 with Overture PLA+

    150% version (1.2.150)

    150% version at 83.33%

    (125% of original)
    Due to the thinner walls, it prints in around the same amount of time with the thick Wall Line Width setting in your slicer!
    Cura - Extra Fast, no brim, Quality: Wall Line Width = 1.2 (can be set in PrusaSlicer in "Print Settings", "Advanced" if "Advanced" settings are enabled)

    • 7h 49m
    • 139g = 46.67m = $2.36

    License

    Support open game license RPGs with free versions at zahyest.com.