Summary

This is a case for an Odroid VU7a touch display.

Print Settings

Printer Brand:

Anet

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>A6</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>

Post-Printing

You will need

4x screws M3x5 mm for mounting display to back part
4x screws M3x10 mm for mounting front and back part together
8x thread inserts M3 - outer-Ø = 4,0 mm, length = 5 mm
Use a soldering iron to (carefully) melt the inserts into the holes.

There are also 4 mounting holes in the back part that will let you mount the whole case to a stand or holder or wherever you want it. The distances between the holes are 28 x 90 mm. You will need additional 4 thread inserts, same size as above. Keep the screws as short as possible, the display board may be damaged if you use too long screws!

And last but not least: as menu buttons you can use some buttons cut from the keypad of an old remote control.

Odroid VU7a Display Case