Bosch Professional FSN guide rail adapter for Wolfcraft mini clamp EHZ

Remix of
https://www.thingiverse.com/thing:3496615
to fit Wolfcraft Mini EHZ clamps to the Bosch FSN guide rails (the ones that are identical to Mafell, i.e. the length is in mm, e.g. FSN 1100).

The part needs some sanding but then it fits perfectly into the guide rail.
To be able to clamp the guide rail to thinner sheets, I cut off a bit of the clamp's metal rod and also removed the little black stopper pin (just use a hammer).
Can be assembled with the screw of the original clamp head.

You can find the clamps on amazon (affiliate link).

Update 25.04.2020:
As I wanted to cut wood at the length of my guide rail, I had to use the clamps on the outermost edge of the rail so only the long sides of the printed parts were slid in. This caused a lot of leverage and one of the print parts broke. I guess I also used more clamping force than necessary.
Please keep this in mind when you use the clamps and it is also good to print 1 or 2 spare parts just in case.
I also updated the part and made it a bit narrower so it should fit into the rail without sanding (not tested yet!). Furthermore, the bracings are solid now.