customizable cigarette case

Created this for my self but decided to quit smoking and therefore not to print it.
Creates Case and matching lid in one file

All measurements are mm

you can change pretty much everything on this. Cigarettes per row and amount of rows, length and diameter of the cigs as well as the filter length. The latter one determines the height of case and cover. Filter will be 5mm in the case. So for the 20mm Filter it's 15mm. 0.5mm are added to the cigarette diameter for an easier fit.

For wall thickness and divider thickness (spacing between holes) use multiples of your nozzle diameter.

If you print it and it works please post a make

Update 2021-10-31:

I updated the Scad file and added some functionality.
edits:

• renamed cig filter length to case height offset
• added limits to vars and some comments
• replaced the hardcoded overlap of case and lid by a var
• replaced the hardcoded gap between printed case and lid by a var
• renamed quali to faces as this sets the $fn var

added functionality:

• it is now possible to select what to generate (case, lid or both)
• adjustable gap between case and lid when generating both
• the lid can now be positioned next to the case on the x or y axis
• if the divider thickness is set to a value greater than zero individual holes for the cigs will still be generated. If it is set to zero however you will get one big hole for shorter print times