Summary

A simple Raspberry Pi 4 model 4 case where the top half snaps in.

Parts description:
raspi4_base.stl - The bottom case part for your Raspberry
raspi4_top_logo.stl - Full height top cover with a Raspberry logo in it
raspi4_top_mini.stl - Low profile top cover

Print Settings

Printer:

Delta Hexagon

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                    <strong>Filament:</strong> eSUN PLA                white                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The pictures shows a print on my custom style Delta with a 0.4mm E3Dv6 clone Hotend in white PLA at 70 mm/s, Sliced with PrusaSlicer 2.2.0. Print Settings: Perimeter 2, 3 Top/Bottom Layers, 30% rectilinear infill, 0.2 mm Layer height, no Support Structure needed. Notes: If you print this in ABS, scale it slightly (101%)</p></div>

Raspberry Pi 4 modell B - Snap in Case