Summary

An adaptor for the TK1688 dust port to 50mm hose.

Hooks on the saw with a small fitting. Has a notch on the down side just in case you feel it needs additional support to fight gravity when your hose is connected.

There are also two versions with for a 100mm hose. One has the bottom fitting (with the v3 in the file name), but may be more difficult to print. The other does not.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                    <strong>Filament:</strong> DasFilament PETG                Green                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printing of course in standing orientation, the round section on top. I used 3 perimeters and I think the 30% infill wouldn't have been necessary. I recommend PETG with fan turned off, came out quite well for me.</p><p>I myself didn't print the 100mm version, but there is a chamfer as good as possible to avoid large overhangs or necessity for support.</p></div>

Metabo TK1688 Dust Adapter