Summary

because the original connector cover on the xr (model is also added) doesn't fit right and the holes are bigger it tends to not fit the electronics box.

because on the xr the cable cover is sandwiched between the rails and bumper it can start to move around while assembling and therefore not fit well.

therefore i've modified it to fit better.

it will probably work with the onewheel plus too but i cannot verify that.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> das filament PLA                white                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>the example was printed in white PLA but it would be better if printed in PETG.</p></div>

How I Designed This

designed by measuring the original and adjusting the dimensions

onewheel xr connector cover