Summary

T handles for Hex Keys or Allan Wrenches

Instructions

Customize to the desired dimensions
For different sized Hex Keys, you will need to change the diameter and the short length (The length of the shorter leg of the Hex key/ Allan Wrench) in Customizer. The .STL included is for a 2.5 mm Hex Key with a short length of 25 mm
Directions:
1)Customize
2)Print
3)stick the Hex Key/ Allan Wrench in the hole, clamp into position with the Clip.
4) When you want the Handle off, simply slide the clip to the other side of the handle and remove your hex key/ Allan wrench

Customizable Hex Key T Handle