Apple IIc 102% longer (for STARTT printer, old files)

Original here: https://www.thingiverse.com/thing:596976
For some reason, in my printer the STL provided:
A. would not print out properly as the single file.
B. were a little too short in length front-to-back
My printer is a STARTT (one of the kits from iMakr for $100 a few years back).
Change: I separated the original STL into parts, and made the length front to back 102% while width and height are still 100% (except the keyboard to 101%, and handle and floppy drive clip were left alone). It made for being able to fit the RPi A+ in better. Hope this helps others who want to make this build like I do.

UPDATE 12/23/2021: I have a new Ender 3 Pro, and am going to be re-printing the original. If that one works great, I'm removing this from the Thingiverse, and might be replacing with a split-version of the original.

UPDATE: 10/18/2023: I printed this out a while ago, and it seems to work just fine with original measurements, but I am leaving these files here in case anyone is printing with a STARTT printer (what these were made for originally) as that printer should work with these files properly.