Summary

A mount custom made for a makergear M2 to attach to a drop indicator for bed leveling.

Instructions

Just rotate fans up, and tighten rear knurled screw on hot end. No tools needed. Very quick and easy. Indicator is available at mscdirect.com
and is ITEM #91942961. It's only 19 bucks! You will need to cut the heads off of a 6-32 screw and a 1/4-20 screw as well. The holes in the printed parts are designed to let these screws self tap. The 6-32 may need to be drilled up a few thousandths of an inch. You want .125 as the OD thread of a 6-32 is .135. Gives a little bite into the plastic as it self taps. You know wut I'm sayin'? Try to get screws to self tap straight. You could drill a little closer to size of screw for easy self threading, and use a few drops of super glue on last few threads.
Please upload any pics of makes!

Bed leveling mount for MSC Drop Indicator on Makergear M2