K8200 Y Axis Tensioner

This is a simple Y axis tensioner i made for the k8200. I made this to tighten my GT2 belt. The belt was rubbing on the x axis rail, so this tensioner lowers the belt out of contact.

Parts needed are:

• 1 x 625 5 x 16 x 5mm bearing
• 1 x 5mm bolt (at least 20mm long)
• 2 x 5mm washers
• 1 x 5mm nut
• 2 x 3mm bolts (at least 15mm long)
• 2 x 3mm nuts