PiKVM Raspberry Pi Zero W 2 Case

This is a case mod for the Flirc Raspberry Pi Zero W / W2 case that adds a mount for the popular Waveshare HDMI to CSI adapter. This case works verry well with the also very popular PiKVM firmware.

This requires:

4 - 10mm m2.5 standoffs
6 - 6mm (ish) m2.5 screws (4 of which come with the case)
2 - m2.5 nuts

The HDMI to CSI adapter should be first secured to the underside of the case half using two screws and two nuts on the back two holes of the PC board. The standoffs should be screwed into the aluminum case through the holes in the Pi Zero.

Feed the flat camera cable through the hole in the original case, and over the lip, under the hdmi to CSI adapter. the case half should then fit over the cable, with the HDMI plug situated just over the cable. Ensure the cable fits inside the case and screw the whole thing together with the last four screws.