Summary

Needed a new one for a piano stool.
Because of the square thread (RH22x7) i could not find one.
So i made one. Printed it and now the stool height adjustmend works again.

Layer Height:
-0.15mm
Infill Density:
-100%
Infill Pattern:
-ZigZag

Print temp:
-200
Build plate temp:
-60

Print Speed:
-60 mm/s

Supports:
-no
Overhang Angle:
-..

Build plate Adhesion:
-Skirt

Printing time:
1x - 02h 20min

Fillament:
1x - 6.34m /~ 19g

Material cost:
1x - 0.19 euro

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.15</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>

Flange nut RH22x7