Hi-Res Automatic Transmission Model

Ko-Fi: https://ko-fi.com/juliettaexpress

Remix of Automatic Transmission Model by emmett: https://www.thingiverse.com/thing:34778

The STL's were seriously segmented in a few areas that made it ugly to look at. Even worse, when I went to look at the OpenSCAD model, there were missing libraries! So I've included a copy of all of them (the CC-BY-SA license applies ONLY to emmett's stuff and does not apply at all to the libraries), and made the necessary adjustments to allow the model to be high-res and print smoothly.

No pics because I haven't printed it myself yet, and knowing me, I'll probably forget once I do.

NOTE: the original has front_loose.stl and back_loose.stl. While I can't confirm which version this model has, it appears to be the loose one.

UPDATES

2022-02-11

• Original Upload

2022-02-16

• pins.scad replaced with correct version
• Shaft, planets, idler, and pins re-uploaded (they were faulty in the original upload)
• brace_loose_1.25.stl and brace_loose_1.5.stl added. These open the brake holes by 125% and 150% respectively, to prevent welding of the brake to the brace itself.
• transmission.scad updated to include method call for brace_loose()
• shaft_95.stl, pin3_95.stl, handle_95.stl, and crank_95.stl added. These is the same as their non-_95 counterparts, except scaled down by 95% so the shaft fits better inside the gears.

2022-02-24

• Fixed crank.stl (it too was faulty in the original upload)
• Uploaded missing handle.stl
• Updated transmission.scad to include handle.stl tweak that made pin fit a bit tighter
• Removed _95.stl variants as sizing became a bit odd on my Ender 3 clone, it's easier to just scale in the slicer manually
• Alphabetized file list