Summary

This holder is designed to stick on windows facing the sun to allow the solar lamp to keep on charging when not in use.

April 18 2022: Updated to v2!

Custom Section

Info

            <div><p>You'll need:</p><ul><li><p>Suction cups - Here are the exact ones we designed our holder to fit - 35mm: <a rel="nofollow" href="https://www.aliexpress.com/item/4001238101343.html?spm=a2g0o.9042311.0.0.27424c4dopBPhs">https://www.aliexpress.com/item/4001238101343.html?spm=a2g0o.9042311.0.0.27424c4dopBPhs</a></p></li><li>Solar Lamp (if you don't already have one) - Here is the one we designed this holder for, 190W: <a rel="nofollow" href="https://www.aliexpress.com/item/1005002759292982.html?spm=a2g0o.9042311.0.0.27424c4dopBPhs">https://www.aliexpress.com/item/1005002759292982.html?spm=a2g0o.9042311.0.0.27424c4dopBPhs</a></li></ul><p>Print Info:</p><ul><li>We highly recommend you print this model using PETG or ABS filaments. PLA cannot handle UV or heat and will deform very quickly if left under direct sunlight</li><li>Print upright as shown</li><li>Model needs supports for the empty side, but the suction cup mounts do not need supports</li><li>Just push in the suction cups into the mounts and you’re good to go!</li></ul><p>Check the link below for more info about this design: <a rel="nofollow" href="https://remal.io/3d-printing/solar-lamp-holder/">https://remal.io/3d-printing/solar-lamp-holder/</a></p></div>

Solar Lamp Holder