Zhiyun Crane 2 motor bumper

Protects the pan axis assembly from bumps and scratches. With heavier camera rigs on the Crane 2, when the CG is far off to the left, the horizontal arm has to be extended to the right to compensate, and it may start colliding with the pan motor. This usually happens when the camera is removed, or the gimbal is powered down and moved around.

Can be used also for the tilt and roll motors, as they are all the same size. The cut-outs for the thumb screw and position scale are only for pan axis.

Print from TPU or other soft material. Use thin double-sided tape to glue to the axis assembly.