Lego Toy Train for Wood Tracks

This is a toy train for typical wooden tracks. It has 8 Lego pins on both sides and 24 more on top. It is compatible with normal Legos. Additionally, there is a platform that can be connected to those top Legos - most of the Hotwheels cars fit in it. The train can be connected to normal trains, as it has slots for cylindrical magnets. Magnet holders can rotate up to 20deg up and down to allow bridge climbing. You will need 2 cylindrical magnets that are around 8.4mm in height and 3.7mm in diameter - I got those from one of those magnetic toys (see pictures).You can still use cylindrical magnets that are smaller in diameter and/or in height as long as they are powerful enough - they probably won't fall out. If your magnets don't fit - you can change the magnet holder for it to fit your magnets - it shouldn't be too hard. If you are to desperate - you can cut the cylindrical part of the magnet holder and tape/glue your magnet in (which I don't recommend - it's simply dangerous).